Automatic bending and welding production line for side of metal cabinet
metal cabinet automatic machine
NO. | Name | Parameter | Remark |
1 | Height of Equipment | From the ground 850±50mm |
|
2 | Size of Equipment | Length * Wide: about 16,000*5000mm |
|
3 | Product size | L=1500-2000mm,W=350-600mm(finished) |
|
4 | Output Capacity | ≤55s/Set | Average |
5 | Material Scope | Q345B |
|
6 | Thickness | 0.5mm-0.8mm |
|
7 | Capacitance | About 80KVA(380V,50Hz) |
|
8 | Barometric Pressure | 0.6~0.8MPa |
|
9 | Machine operating temperature | -5℃-40℃ |
|
10 | Machining accuracy | The limit deviation accuracy of the dimensions without tolerance in the drawing is according to GB1804-m |
|
11 | control system | SYNTEC (Made in Taiwan) |
This scheme is the basis of the product drawings provided by Luoyang CBNT Automation Equipment Co., Ltd. to protocol the preliminary technical proposal and quotation.Our forming line is mainly composed of feeding spreading platform, moving splitting robot, bending center, transfer moving robot, welding line, reinforcing bar case , reinforcing bar loading robot, unloading robot, pneumatic system, hydraulic system, electric control system and so on.Application: high volume production of side of metal cabinet.
Process flow: feeding -- bending center of four sides forming -- transfer moving robot -- reinforcing bar loading -- welding line -- unloading
2. Overall Layout Diagram:
3.2200CBZHSCX bending welding production line configuration
Name | parameters | remark | |
1 | Splitting control center | Length and width:About 2000X800mm | CBNT |
2 | feeding robot | BRTIRUS 2550A 50KG | BRTIRUS |
3 | N22 Bending center | CBNT Bending center N22 | CBNT |
4 | reinforcing bar case | case A case B | CBNT |
5 | transfer moving robot | BRTIRUS2550A 50KG | BRTIRUS |
6 | reinforcing bar loading robot | BRTIRUS1510A 10KG | BRTIRUS |
7 | welding line system upgrade version | Hamworthy | CBNT |
8 | Unloading truss robot |
| CBNT |
9 | Unloading robot | 50KG2550A 50KG | BRTIRUS |
10 | Hydraulic lubrication system |
|
|
11 | Electronic control system | SYNTEC (Made in Taiwan) |
|
12 | pneumatic system | AirTAC |
SUPPLY ABILITY AND TRADING TERMS
Terms of payment
-T/T, 10% deposit before design the drawing draft, 60% before production, 20% before loading, 10% the balance after the adjustment and installation.
Lead-time
1.Design picture draft: 2 weeks
2.Production line: 3 months
3.Technical training: 1 week. The company can also provide in-door installation, equipment debugging, technical training services, to guide the plant establishment and production.
APPLICATION
Company / Factory / Storage / Workshop/ Production Department/ Manufacturing shop
沪公网安备31010402003309号
